Key Features 

• Juhai 550mAh 2S 7.4V 75C High Discharge Li-Po Battery
• Compact, lightweight, and ideal for RC drones, airplanes, cars & DIY projects
• Delivers stable power output with 75C high discharge rate for better performance
• Fast Home Delivery all over Bangladesh
• 4 Day General Warranty
• Equipped with XT30 discharge plug and JST-XH balance connector
• Perfect for FPV racing drones and micro RC applications in Bangladesh

Key Features

• ZK-4KX DC-DC Buck Boost Converter 0.5–30V 4A Adjustable Power Supply
• Supports both step-up and step-down voltage regulation (boost & buck)
• LCD display shows voltage, current, power, capacity & time clearly
• Adjustable constant voltage (CV) and constant current (CC) modes
• Built-in multiple protection systems (overvoltage, overcurrent, overheat, reverse)
• High conversion efficiency (≈88%) with thickened heat sink for better cooling
• Perfect for electronics lab, DIY projects, and battery charging in Bangladesh

Buy SONOFF THR316D TH Elite Smart Temperature & Humidity Switch in Bangladesh.
16A Wi-Fi control, ESP32, smart automation & sensor support for home & industry.

Smooth manual Z-axis height adjuster for TWO TREES laser engravers,
offering precise laser focus and improved engraving accuracy.

Features

• 1S LiPo Power: Designed for a single-cell (3.7V) LiPo batterymyinnovation.in, supporting compact micro drone builds.
• 4-Motor Control: Four PWM motor outputs control 4 small brushed (coreless) motorsmyinnovation.in.
• Built-in Receiver: Integrated 2.4GHz radio receiver onboard – no separate RX board neededmyinnovation.in.
• Onboard IMU: Includes a 6-axis IMU (gyro + accelerometer) for automatic stabilizationoscarliang.comoscarliang.com.
• Compact Size: Tiny PCB (~26×26 mm) fits Whoop-style or inductrix framesbetafpv.com.
• Plug-and-Play: Just solder the 4 motors and 3.7V battery and bind your transmitter – then flymyinnovation.in.

• 13.56MHz Printable 1K RFID Smart Card for universal access and ID applications
• Supports ISO 14443A protocol with FM08 / Classic 1K chipset
• High durability PVC construction for long-term use
• Standard ISO CR80 card size (85.5×54mm) – fits any card reader
• Read range 1-10cm depending on antenna and environment
• 100000 write cycles for stable and reliable performance

The Lencit P15 Lite is a 15.6-inch Full HD IPS portable touchscreen monitor designed for professionals,
gamers, and creators needing a lightweight, high-quality secondary display with vivid colors and sharp clarity.

• EM4100 RFID Key Tag provides secure access identification.
• Compatible with most 125kHz RFID readers and modules.
• RFID Key Fob is durable and waterproof with ABS plastic housing.
• Compact and lightweight design for daily use and easy carrying.
• Requires no battery — works as a passive RFID tag.
• Ideal for door access control, attendance, and smart lock systems.

Durable Arduino Uno R3 3D Printed SnapFit Case with screwless design, LED light guides, and optional wall-mount for secure project protection in Bangladesh.

Seeed Studio XIAO ESP32-C6 Wi-Fi 6, Bluetooth 5 & Zigbee IoT development board for smart automation projects in Bangladesh.

• 4-wire slip ring for signal and power transmission
• Gold-to-gold contact ensures stable and low-resistance connection
• Rated for 240V AC/DC and 2A per circuit
• Compact and durable engineering plastic housing
• Long lifespan – up to 50 million rotations
• Supports up to 300 RPM rotation speed

• Built-in CH340G USB to TTL chip
• Supports 3.3V and 5V output
• Ideal for STC and Arduino PRO download
• Cold start reset button for microcontrollers
• Supports Windows, Mac & Linux systems
• Compact mini module design

• Lightweight and durable 3D printed drone frame.
• Specially designed for 110 class mini RC drones.
• Compatible with RacerStar 8520 (8.5x20mm) coreless motors.
• Supports 1mm shaft propellers up to 65mm length.
• Battery compatibility: 1S 600mAh (best for flips), 1000–1200mAh (max).
• Strong v5 clamp band motor mount for stability.

• Compact N20 DC motor with 6V operating voltage
• High torque with 800 RPM speed for robotics and DIY projects
• Includes wheel, mount, and screw for easy installation
• Durable and efficient design for long-term use
• Ideal for small robots, cars, and automation systems

• Smart LCD display showing real-time charging status and capacity.
• Compatible with 26650, 21700, 18650, and other Li-ion batteries.
• USB-powered design for portability and convenience.
• Automatic detection of battery capacity and internal resistance.
• Three-stage charging (TC/CC/CV) for safe operation.
• Overcharge, overheat, and short-circuit protection.
• Dual independent charging slots.

VL53L1X V2 ToF laser distance sensor for long-range measurement with high accuracy in Bangladesh BD, ideal for drones and robotics.

• Supports Li-ion, Ni-MH, and Ni-Cd rechargeable batteries
• Intelligent charging with automatic current detection
• Four independent charging slots
• Real-time battery capacity display
• Overcharge, overcurrent, and short-circuit protection
• Adjustable charging current: 0.5A / 1A

• High Load Capacity: High load capacity
• Long Stroke Length: 250mm (10 inches) for versatile use.
• DC12V Powered: Ideal for low-voltage systems.
• Durable Material: Made with aluminum alloy for strength and corrosion resistance.

• Made from high-quality carbon fiber material
• Anti-static design for safe handling of sensitive electronics
• Lightweight and durable construction
• Precision tips for fine electronic work

• Supports up to 5A current for fast charging
• QC3.0 quick charge compatible
• Durable braided cable for long life
• USB to iPhone Lightning interface

• Supports up to 5A current for fast charging
• QC3.0 quick charge compatibility
• Durable braided cable design
• USB to Type-C interface

• Supports up to 60W (20V/3A) fast charging
• Durable braided nylon exterior
• USB 2.0 standard with 480Mbps data transfer speed
• Type-C to Type-C reversible connectors

• 7-inch display with 800×480 resolution
• True multi-touch capacitive panel (10-point touch)
• Powered directly from Raspberry Pi (no external supply needed)
• On-screen keyboard support with Raspberry Pi OS
• Connects via DSI ribbon cable and GPIO power
• Compatible with all Raspberry Pi boards (except Pi 400 & Pi Zero line)

Key Features

• Original Arduino Mega 2560 Rev3 with ATmega2560 microcontroller
• 54 digital I/O pins, 16 analog inputs & 15 PWM outputs for complex projects
• Warranty: 4 Days General Warranty
• Fully compatible with Arduino IDE, shields & libraries
• Large program memory: 256KB Flash, 8KB SRAM, 4KB EEPROM
• Recommended for advanced prototyping & multi-sensor applications in Bangladesh

Key Features

• Supports ESP8266 ESP-01, ESP01S, ESP12, and ESP32-WROVER
• 4 Day General Warranty
• Fast Home Delivery all over Bangladesh
• Uses CP2104 driver for stable serial communication
• Compatible with Windows, Linux, and macOS
• Compact, portable, and ideal for IoT development in Bangladesh BD
• Perfect for testing, flashing, and programming multiple ESP modules

Key Features

• 40 bright LEDs with wide-angle illumination
• 5.5V 1W monocrystalline solar panel for efficient charging
• Waterproof ABS + PC body for outdoor use in Bangladesh weather
• Fast Home Delivery all over Bangladesh
• Solar-powered rechargeable battery – no electricity cost
• 4 Day General Warranty
• Perfect for gardens, pathways, walls, and outdoor security lighting

Key Features

• 1080P Full HD smart projector with Android 11 for smart streaming
• LED light source with long lifespan and energy-efficient performance
• 1000:1 contrast ratio delivers sharp, vibrant and clear visuals
• Portable, lightweight design—ideal for home, office & travel
• Warranty: 4-day general warranty
• Resin lens for distortion-free and crisp image quality

• Durable Material: Constructed from high-quality plastic for lasting performance
• Easy Adjustment: Ergonomically designed handle for comfortable grip and precise leveling
• Wide Compatibility: Suitable for 3D printers using M4 screws for platform leveling
• Enhanced Stability: Ensures a leveled hot bed, resulting in improved print quality

• 445nm blue-violet wavelength for precision engraving
• Adjustable output power (1300mW – 1600mW)
• Long light spot mode for clear marking
• Adjustable focal length (2–7 cm)
• TTL/PWM modulation for CNC/DIY control
• Quick preheat (<1 minute)

Key Features

• Ultra-fast 500 mm/s 3D printing
• Large 256 × 256 × 256 mm build volume
• All-metal hotend (300°C) for precise prints
• Advanced motion system with active vibration compensation
• Textured PEI build plate included
• 4 Day General Warranty
• Fast Home Delivery all over Bangladesh
• Ideal for PLA, PETG, TPU, PVA

• Genuine Creality screen kit with protective housing
• Compatible with Creality Ender-3 3D printers
• High-contrast 128×64 resolution white & blue display
• Durable black metal housing with white marking
• Smooth control with potentiometer knob
• Easy connectivity with EXP1, EXP2, EXP3 connectors

Key Features 

• Wireless K8 microphone with plug-and-play simplicity
• Stable 2.4GHz wireless audio transmission
• Noise-reduction technology for clear, professional-quality voice
• 10-hour long-lasting battery performance
• 4 Day General Warranty
• Fast Home Delivery all over Bangladesh
• Compatible with smartphones, cameras, laptops, and tablets
• 360° omnidirectional pickup for natural voice capture
• Up to 20 meters transmission distance

• High-quality tweeter speaker for car and studio use
• Audio sensitivity: 92dB for clear sound reproduction
• Max power output 210W
• Frequency range: 2kHz – 25kHz for crisp highs
• Impedance: 4 Ohms
• Silk membrane material for smooth HF response

• Based on ESP8266 ESP-12F WiFi module
• Type-C USB interface with CH340 chip
• 32-bit Tensilica L106 microprocessor
• 4MB external flash memory
• 17 digital GPIO pins (PWM capable)
• Single ADC analog input (0–1V range)

• Versatile mini electric drill and grinder set
• Includes various accessories for carving, painting, deburring, and polishing
• Suitable for working on materials like stainless steel, glass, ceramic, wood, and more
• Adjustable speed for precise control

• Brand New Design: A new, efficient cleaning brush tool designed for various electronics.
• Versatile Use: Ideal for cleaning keyboards, mobile phone components, computer fans, laptops, and more.
• Soft and Safe: The soft nylon bristles ensure no scratching or damaging of sensitive components like mobile phone parts.
• Professional Tool: Perfect for technicians who need precision and care during their work.

• High printing accuracy of 0.1mm for precise 3D prints.
• Supports multiple nozzle sizes (0.2mm, 0.3mm, 0.4mm, 0.6mm) with a default of 0.4mm.
• Compatible with PLA and ABS filament of 1.75mm diameter.
• Over-temperature protection ensures safe and reliable operation.

• High torque performance: 1.26N.m holding torque
• Precise 1.8° step angle for accurate motion control
• Rated current: 2.5A, suitable for CNC and 3D printers
• Durable NEMA 23 hybrid stepper construction
• Low vibration and smooth operation
• Shaft diameter: 6.35mm

• Strong self-adhesive backing with waterproof sealing
• Aluminum foil surface for heat and weather resistance
• Rubberized layer prevents leaks and cracks
• 4-inch width for wide coverage

• Self-adhesive for easy installation.
• Can withstand temperatures from -60°C to 260°C.
• Waterproof and pressure-resistant up to 5 bar.
• Aluminum foil material ensures durability and strength.

• FDM 3D printing technology for precise and smooth prints
• Build volume of 220×220×250 mm for versatile modeling
• Silent 32-bit mainboard with TMC2209 motor driver
• 0.4 mm nozzle with max temperature of 255 °C
• Heated bed up to 110 °C for PLA, ABS, and TPU
• Quick assembly with upgraded user-friendly design

• High-quality aluminum alloy - 6063 T5 for strength and durability
• European standard for precise engineering
• Suitable for 3D printer parts, CNC machines, and DIY projects
• Black anodized finish for extra protection and a sleek appearance